Item
Mode
Rate
RSSI0, RSSI1
Signal
Interface
Refresh
3.3.3
Advanced Configuration
The router provides advanced wireless configuration for advanced users to optimize the wireless performance under the
specific installation environment. Please note that if you are not familiar with Wi-Fi technology, do not adjust the Advanced
Configuration section or the connectivity and performance may be adversely affected with improper settings.
Navigate to the Basic Network > Wi-Fi > Advanced Configuration Tab.
3.3.3.1
Select Target Wi-Fi
Item
Operation Band Mandatory field. Specify the intended operation band for the Wi-Fi module.
NTC-400 Series
Displays what kind of Wi-Fi system the client used to associate with this device.
Displays the data rate between client and this device.
Displays the RX sensitivity (RSSI) value for each radio path.
The signal strength between the client and this device.
Displays the VAP ID that the client associated with.
Click the Refresh button to update the Client List immediately.
Table 68 – Client List
Table 69 – Target Wi-Fi
Notes
Table 70 – Target Wi-Fi
Description
Description
103 of 359
© NetComm Wireless 2019