Table of Contents
Advertisement
Item
Undo
Back
7.1.3.7
Edit SNMP options
If you use a private MIB, you must enter the enterprise name, number and OID.
Item
Enterprise Name
Enterprise
Number
Enterprise OID
Save
Undo
7.1.4
Telnet with CLI settings
Command-line interface (CLI), also known as command-line user interface or console user interface, is a computer program
where the user (or client) types lines of text into a command line shell which converts the commands to appropriate
operating system functions. Programs with command-line interfaces are generally easier to automate via scripting. The NTC-
400 Series Router supports both Telnet and SSH (Secure Shell) CLI with default service port 23 and 22, respectively.
286 of 359
© NetComm Wireless 2019
Notes
Button
Button
Table 195 – Trap Event Receiver Rule Configuration
Figure 323 – Edit SNMP Options
Value setting
Mandatory field.
Specify the Enterprise Name for the particular private MIB.
String format: any
Value Range: 1 - 10 characters, and only string with A-Z, a-z,
text
0-9, '–', '_'.
Mandatory field.
Specify the Enterprise Number for the particular private
MIB.
String format: any
number
Value Range: 1 - 2080768.
Mandatory field.
Specify the Enterprise OID for the particular private MIB.
String format: any
The range of the each OID number is 1-2080768.
legal OID.
The maximum length of the enterprise OID is 31.
The seventh number must be identical with the enterprise
number.
Button
Click the Save button to save the configuration and apply
your changes to SNMP functions.
Button
Click the Undo button to cancel the settings.
Table 196 – Edit SNMP Options
Description
this reminds the user to click main page Save button at
which point the settings will be applied.
Click the Undo button to cancel the settings.
Click the Back button to return to SNMP configuration
page.
Description
User Guide
Advertisement
Table of Contents
