Table of Contents
Advertisement
7.2
System Operation
System Operation allows the network administrator to manage system settings such as web-based utility access password
change, system information, system time, system log, firmware/configuration backup & restore, and reset & reboot.
7.2.1
Password & MMI
7.2.1.1
Change Password
To manage access to the Web-User Interface:
1
Select System Operation from the Administration submenu and click the Password & MMI tab and go to the
Password section.
2
The Password settings allow a network administrator to change the MMI login password:
Item
Old Password
New Password
New Password
Confirmation
Save
Undo
7.2.1.2
Manage access settings
The Web-User Interface section allows an administrator to make various security related settings to prevent unauthorised
access or use.
To change the MMI access settings:
1
Select System Operation from the Administration submenu and click the Password & Web-User Interface tab and go
to the Web-User Interface section.
2
Settings allow the administrator to set the number of unsuccessful login attempts and to enable automatic logout
after a defined idle time. Alternatively, the timeout function can be disabled.
NTC-400 Series
Figure 327 – Password setting
Notes
String: any alpha-numeric
character
The default password for
web-based MMI is 'admin'.
String: any alpha-numeric
character
String: any alpha-numeric
character
Button
Button
Table 200 – Password setting
Description
Enter the current password to enable you to unlock
and change to the new password.
Enter new password.
Enter new password again to confirm.
Click Save button to save the settings.
Click Undo button to cancel the settings.
289 of 359
© NetComm Wireless 2019
Advertisement
Table of Contents
