NetComm NTC-400 Series User Manual page 51

When WAN Type is set to PPTP, the following options are displayed:
Item
IP Mode Mandatory
field.
Server IP Mandatory
Address/Name field.
PPTP Account Mandatory
field.
PPTP Password Mandatory
field.
Connection ID
Optional
setting
MPPE Optional
setting
NTC-400 Series
Figure 56 – PPTP WAN Type Configuration
Notes
Select either Static or Dynamic IP address for PPTP Internet connection.
When Static IP Address is selected, you will need to enter the WAN IP Address,
WAN Subnet Mask, and WAN Gateway.
WAN IP Address (mandatory field) – Enter the WAN IP address given by
your Service Provider.
WAN Subnet Mask (mandatory field) – Enter the WAN subnet mask
given by your Service Provider.
WAN Gateway (mandatory field) – Enter the WAN gateway IP address
given by your Service Provider.
When Dynamic IP is selected, there are no above settings required.
Enter the PPTP server name or IP Address.
Enter the PPTP username provided by your Service Provider.
Enter the PPTP connection password provided by your Service Provider.
Enter a name to identify the PPTP connection.
Select Enable to enable MPPE (Microsoft Point-to-Point Encryption) security for PPTP
connection.
Table 39 – PPTP WAN Type Configuration
Description
© NetComm Wireless 2019
51 of 359