L2Tp Setting; Enable L2Tp; L2Tp Server - NetComm NTC-400 Series User Manual

6.1.3.2

L2TP Setting

The L2TP setting allows user to create and
6.1.3.3

Enable L2TP

To enable the Layer 2 Tunnelling Protocol functionality:
1 Select VPN from the Security submenu and click the L2TP tab.
2 Go to the Configuration section:
Click  Enable L2TP and select a configuration type, either Server or Client, for the router to operate as.
3
Item
L2TP
Server/ Clients
6.1.3.4

L2TP Server

When Server is selected in the Configuration section the L2TP Server Configuration screen will appear. Configure the router
to act as a L2TP server here.
Item
L2TP Server
L2TP over IPSec
226 of 359
© NetComm Wireless 2019
configure L2TP tunnels.
Figure 259 – Enable L2TP VPN Security
Notes
Disabled by default.
Default selection:
Server
Table 155 – Enable L2TP VPN Security
Figure 260 – L2TP Server Configuration
Notes
Disabled by default. Click  Enable to activate L2TP Server functions.
Disabled by default. Click  Enable Preshared Key to enable L2TP over IPSec functionality.
Description
Check  Enable to activate the L2TP functionality.
When Server is selected, as the name indicated, server
configuration will be displayed below for further setup.
When Client is selected, you can specify the client settings
in another client configuration window.
Description
User Guide