Table of Contents
Advertisement
Click Enable OpenVPN and select a configuration type, either Server or Client, for the router to operate as.
3
Item
OpenVPN
Server/ Clients
6.1.2.4
OpenVPN Server
If Server is selected, the OpenVPN Server Configuration section displays fields required to configure the OpenVPN server
function including: the virtual IP address of OpenVPN server, when remote OpenVPN clients can dial in, the authentication
protocol, etc.
The OpenVPN Server supports up to 4 TUN/TAP tunnels at the same time.
216 of 359
© NetComm Wireless 2019
Notes
Check Enable to activate the OpenVPN function.
Disabled by default.
Server is the default
When Server is selected the server configuration
selection.
fields are displayed in the OpenVPN Server
Configuration section.
When Client is selected, you can specify the client
settings in another client configuration window.
Table 150 – Open VPN Configuration
Figure 253 – OpenVPN Server Configuration
Description
User Guide
Advertisement
Table of Contents
