Table of Contents
Advertisement
Item
Destination
MACs
Destination IPs Optional setting
Destination
Ports
7.4.2
Diagnostic Tools
The Diagnostic Tools provide some frequently used network connectivity diagnostic tools (approaches) for the network
administrator to check the device connectivity.
To access the Diagnostic Tools:
1
Select Diagnostic from the Administration submenu and click the Diagnostic Tools tab.
2
The Diagnostic Tools screen will display:
308 of 359
© NetComm Wireless 2019
Notes
Optional setting
Define the filter rule to include only specific destination MAC
addresses of packets.
Packets which match the rule will be captured.
Up to ten MAC addresses are supported and they must be
separated with ";".
For example: AA:BB:CC:DD:EE:FF; 11:22:33:44:55:66
The packets will be captured when they match any one of the MAC
addresses listed in this text box.
Define the filter rule to include only specific destination IP
addresses of the packets.
Packets which match the rule will be captured.
Up to ten IPs are supported, but they must be separated with ";".
For example: 192.168.1.1; 192.168.1.2
The packets will be captured when they match any one of the IP
addresses listed in this text box.
Optional setting
Define the filter rule to include only the destination port of
packets.
Packets which match any port number listed in this text box will be
captured.
Up to 10 ports are supported, but they must be separated with ";".
For example: 80; 53
Value Range = 1 - 65535.
Table 219 – Packet Capture Filters
Figure 352 – Diagnostic Tools
Description
User Guide
Advertisement
Table of Contents
