Sms Forwarding Configuration; Redirect To Mobile; Redirect To Tcp / Udp Server Address; New Message - NetComm NTC-220 User Manual

O P T I O N
UDP server address
UDP port

SMS forwarding configuration

Incoming text messages can be redirected to another mobile device and/or a TCP/UDP message server.

Redirect to mobile

You can forward incoming text messages to a different destination number. This destination number can be
another mobile phone or a router phone number.
For Example:
If someone sends a text message and Redirect to mobile is set to "+61412345678", the text message is stored on
the router and forwarded to "+61412345678" at the same time.
To disable redirection to a mobile, clear the Redirect to mobile field and click the Save button.

Redirect to TCP / UDP server address

You can also forward incoming text messages to a TCP/UDP based destination. The TCP or UDP server can be any
kind of public or private server if the server accepts incoming text-based messages.
The TCP/UDP address can be an IP address or domain name. The port number range is from 1 to 65535. Please
refer to your TCP/UDP based SMS server configuration for which port to use.
For Example:
If someone sends a text message and TCP server address is set to "192.168.20.3" and TCP port is set to "2002",
this text message is stored in the router and forwarded to "192.168.20.3" on port "2002" at the same time.
To disable redirection to a TCP or UDP address, clear the TCP server address and UDP server address fields and
click the Save button.

New message

The New message page can be used to send SMS text messages to a single or multiple recipients. To access the
New message page, click on the Services menu item from the top menu bar, select the SMS messaging menu on
the left then select the New message menu item.
A new SMS message can be sent to a maximum of 9 recipients at the same time. After sending the message, the
result is displayed next to the destination number as "Success" or "Failure" if the message failed to send. By
default, only one destination number field is displayed. Additional destination numbers may be added one at a
time after entering a valid number for the current destination number field. To add a destination number, click the
button and to remove the last destination in the list, click the
NTC-220 – User Guide
UG01028 v1.2 March 2019
Enter an IP address or domain name as the destination for
forwarded SMS messages using UDP.
The UDP port on which to connect to the remote destination.
Table 35 – SMS Setup Settings
D E F I N I T I O N
button.
123 of 193
© NetComm Wireless 2019