NetComm NTC-400 Series User Manual page 97

Item Notes
Encryption Mandatory field.
Default setting:
None
Save Button
Undo Button
Apply Button
NTC-400 Series
The check box named 802.1x shows up next to the dropdown list.
802.1x (Disabled by default.) - When 802.1x is enabled, the client stations will be
authenticated by RADIUS server.
RADIUS Server IP (The default IP is 0.0.0.0)
RADIUS Server Port (The default value is 1812)
RADIUS Shared Key
When WPA or WPA2 is selected.
WPA and WPA2 are implementations of IEEE 802.11i. WPA only had implemented part of
IEEE 802.11i, but owns the better compatibility.
WPA2 had fully implemented 802.11i standard, and owns the highest security.
RADIUS Server
The client stations will be authenticated by RADIUS server.
RADIUS Server IP (The default IP is 0.0.0.0)
RADIUS Server Port (The default value is 1812)
RADIUS Shared Key
When WPA / WPA2 is selected, the client stations can associate with this device via WPA or
WPA2.
When WPA-PSK or WPA2-PSK is selected, the authentication uses pre-shared keys instead
of RADIUS server.
When WPA-PSK / WPA2-PSK is selected, the client stations can associate with this device
via WPA-PSK or WPA2-PSK.
Select the desired encryption method and enter the required key(s). The available method
in the dropdown list depends on the Authentication you selected.
None – the device is open with no encryption.
WEP - Up to 4 WEP keys can be set and you have to select one as current key. The key type
can set to HEX or ASCII. If HEX is selected, the key should consist of (0 to 9) and (A to F).
If ASCII is selected, the key should consist of ASCII table.
TKIP - TKIP was proposed instead of WEP without upgrading hardware. Enter a Pre-shared
Key for it. The length of the key is from 8 to 63 characters.
AES - The newest encryption system in Wi-Fi. This is also designed for the fast 802.11n high
bitrates schemes. Enter a Pre-Shared Key. The length of the key is from 8 to 63 characters.
We recommend that you use AES encryption for security as it is the most secure.
TKIP / AES - TKIP / AES mixed mode. Client stations can associate with this device via TKIP
or AES. Enter a Pre-Shared Key. The length of the key is from 8 to 63 characters.
Click the Save button to save the current configuration.
Click the Undo button to restore configuration to previous setting before saving.
Click the Apply button to apply the saved configuration.
Table 65 – AP Router Mode
Description
© NetComm Wireless 2019
97 of 359