Table of Contents
Advertisement
IPS Status
Item
Detected
Intrusion
IP
Time
Note – Ensure IPS Log Alert is enabled.
Firewall Options Status
Item
Stealth Mode
SPI
Discard Ping
from WAN
Remote
Administrator
Management
Note – Ensure Firewall Options Log Alert is enabled.
NTC-400 Series
Figure 35 – IPS Status
Value setting
System data.
This is the intrusion type of the packets being blocked.
System data.
The Source IP (IPv4) of the logged packet.
System data.
The Date and Time stamp of the logged packet. Date & time
format. ("Month" "Day" "Hours":"Minutes":"Seconds")
Table 27 – IPS Status
Refer to Security > Firewall > IPS tab. Check Log Alert and save the setting.
Figure 36 – Firewall Options Status
Value setting
System data.
Enable or Disable setting status of Stealth Mode on Firewall Options.
String Format: Disable or Enable
System data.
Enable or Disable setting status of SPI on Firewall Options.
String Format : Disable or Enable
System data.
Enable or Disable setting status of Discard Ping from WAN on
Firewall Options.
String Format: Disable or Enable
System data.
Enable or Disable setting status of Remote Administrator.
If Remote Administrator is enabled, it shows the currently logged in
administrator's source IP address and login user name and the login
time.
Format:
IP : "Source IP", User Name: "Login User Name", Time: "Date time"
Example:
IP: 192.168.127.39, User Name: admin, Time: Mar 3 01:34:13
Table 28 – Firewall Options Status
Description
Description
37 of 359
© NetComm Wireless 2019
Advertisement
Table of Contents
