Table of Contents
Advertisement
Item
Synchronization
method
Daylight Saving Time This is an optional item.
Set Date and Time
Manually
Save
7.2.3.3
Time Server method
When the Time Server Synchronization method is chosen the following configuration settings are available:
Item
Synchronization
method
Time Zone
Synchronize
Immediately
Sync Result
Save
7.2.3.4
Cellular Module method
When the Cellular Module Synchronization method is chosen the following configuration settings are available:
NTC-400 Series
Notes
Manual
Disabled by default.
Date and time settings
Button
Table 204 – System Time Configuration - Manual Synchronization
Figure 333 – System Time Configuration - Local PC
Notes
PC
This setting will use the system time of the PC that you have
opened the web interface on.
Drop down
Select the time zone of your device.
menu
Button
Click the Active button the system will be set to the local PC's
system date and time.
System
When the Active button is clicked, the Time Synchronization
generated and
Results panel will display the time the synchronisation
button
occurred.
Click the Close button to hide the panel.
Button
Click the Save button to save the settings.
Table 205 – System Time Configuration - Local PC
Description
This setting determines the configuration settings
available.
Check the Enable button to activate the daylight
saving function.
When you enable this function, you have to specify
the start date and end date for daylight saving time
in your region.
Enter the date and exact time that you want the
clock to run from when the Save button is clicked.
Click the Save button to save the settings.
The system clock will be reset to begin at the time
entered.
Description
293 of 359
© NetComm Wireless 2019
Advertisement
Table of Contents
