NetComm NTC-400 Series User Manual page 329

Managing Events functionality is disabled by default, to enable this tool select Event Handling from the Service submenu and
click on the Managing Events tab.
Item
Managing Events
The Managing Event List supports a maximum of 128 rules.
Click the Add button.
The Managing Event Configuration screen will display.
Item
Event SMS by default
NTC-400 Series
Figure 388 – Enable Managing Events
Notes
Click  Enable to activate the Managing Events functionality.
Disabled by default.
Table 241 – Enable Managing Events
Figure 389 – Managing Event List
Figure 390 – Managing Event Configuration
Notes
Specify the Event type (SMS, SNMP Trap, or DI) and an event identifier / profile.
SMS – Select SMS and type the trigger condition for the event in the textbox;
SNMP Trap – Select SNMP Trap and specify the SNMP Trap Event in the textbox;
Digital Input – Select Digital Input and a DI profile you defined to specify a
certain Digital Input Event;
Description
Description
Note – Available Event Types can differ between products.
329 of 359
© NetComm Wireless 2019