Table of Contents
Advertisement
Click PPTP Enable and select a configuration type, either Server or Client, for the router to operate as.
3
Item
PPTP
Server/ Clients
Save
As a PPTP Server
If Server is selected the PPTP Server Configuration displays where you can enable the PPTP server function and specify its
settings. Configure the router to act as a PPTP server here.
Item
PPTP Server
Server Virtual IP
IP Pool Starting
Address
IP Pool Ending
Address
234 of 359
© NetComm Wireless 2019
Notes
Checkbox, disabled by
default.
Drop-down list.
Server is the default
selection.
Button
Figure 269 – PPTP Server Configuration
Notes
Disabled by default. Click Enable to activate PPTP Server functions.
Mandatory field.
Specify the PPTP server Virtual IP address.
Default setting:
The virtual IP address will serve as the virtual DHCP server for the PPTP
192.168.0.1
clients.
Clients will be assigned a virtual IP address from it after the PPTP tunnel
has been established.
Mandatory field.
Enter the PPTP server's Virtual IP DHCP server. User can specify the
first IP address for the subnet from which the PPTP client's IP address will
Default setting: 10
be assigned.
Value Range: 1 - 254
Mandatory field.
Enter the PPTP server's Virtual IP DHCP server.
Default setting: 17
Specify the last IP address for the subnet from which the PPTP client's
IP address will be assigned
Value Range: >= Starting Address, and < (Starting Address + 8) or 254
Check Enable to activate the PPTP functionality.
When Server is selected the server configuration
screen will be displayed below for further setup.
When Client is selected the client configuration will be
displayed instead.
Click Save to save the setting.
Table 162 – Enable PPTP
Description
Description
User Guide
Advertisement
Table of Contents
