NetComm NTC-400 Series User Manual page 283

Item
User Name
Password
Authentication None is selected by
Encryption
Privacy Mode
Privacy Key
Authority
OID Filter
Prefix
Enable
Save
Undo
Back
NTC-400 Series
Notes
Mandatory field Specify the User Name for this version 3 user.
String format: any text Value Range: 1 - 32 characters.
String format: any text When your Privacy Mode is authNoPriv or authPriv, you must
specify the Password for this version 3 user.
Value Range: 8 - 64 characters.
When your Privacy Mode is authNoPriv or authPriv, you must
default specify the Authentication types for this version 3 user.
Selected the authentication types MD5/ SHA-1 to use.
None is selected by When your Privacy Mode is authPriv, you must specify the
default Encryption protocols for this version 3 user.
Select either the DES or AES encryption protocol.
noAuthNoPriv is the Specify the Privacy Mode for this version 3 user:
default setting
noAuthNoPriv = Default selection
authNoPriv = Select if you do not use any authentication types
and encryption protocols.
authPriv = When selected you must specify the Authentication
and Password.
You must specify the Authentication, Password, Encryption
and Privacy Key.
String format: any text When your Privacy Mode is authPriv, you must specify the
Privacy Key (8 - 64 characters) for this version 3 user.
Default setting: Read Specify this version 3 user's Authority that will be allowed
Read Only (GET and GETNEXT) or Read-Write (GET, GETNEXT
and SET) access respectively.
Mandatory field The OID Filter Prefix restricts access for this version 3 user to
the sub-tree rooted at the given OID.
String format: any
legal OID Value Range: 1 - 2080768.
Default setting: 1
Enabled by default. Enables this version 3 user.
Button The Save button saves the configuration settings, but it does
not apply them to SNMP functions.
When you return to the SNMP main page the "Click on save
button to apply your changes" reminder appears, this reminds
the user to click main page Save button at which point the
settings will be applied.
Button Click the Undo button to cancel the settings.
Button Click the Back button to return to SNMP configuration page.
Table 194 – User Privacy Rule Configuration
Description
© NetComm Wireless 2019
283 of 359