NetComm NTC-400 Series User Manual page 330

Item
Description Any text.
Action All disabled by default.
Managing Disabled by default.
Event
Save Button
Undo Button
330 of 359
© NetComm Wireless 2019
Notes
Write a brief, meaningful description of the event rule.
Specify Network Status, or at least one rest action to take when the expected
event is triggered.
Network Status – Uses the network status as the action for the event. If this is
selected, not other Actions are available.;
LAN – Allows the event to trigger the following settings:
– Connect/Disconnect Port link
– Set to Auto, LTE or 3G
– Switch to SIM A or SIM B
LAN&VLAN – Three Port Links can be turned On or Off when the event is
triggered;
Wi-Fi – Allows the event to turn Wi-Fi 2.4G or Wi-Fi 5G on or off;
NAT – Allows the event to trigger predefined Virtual Server Rules to be turned
on or off and the DMZ to be turned on or off;
Firewall – Allows the event to trigger five Remote Administrator Host IDs to be
turned on or off, and to turn WAN Discard Ping on or off;
VPN – Allows the event to trigger a number of IPSec, PPTP Client, L2TP Client
and Open VPN Client settings;
GRE – Allows the event to trigger on or off a number of GRE (Generic Routing
Encapsulation) connections;
System Manage – Allows the event to trigger on or off either WAN SSH or TR-
069 services;
Administration – Allows the event to trigger one of the following administrative
activities:
– Backup Config;
– Restore Config;
– Reboot;
– Save Current Setting as Default;
Digital Output – Allows the event to trigger a Digital Output (DO) profile you
defined;
Modbus – Select the Modbus checkbox and a Modbus Managing Event profile
you defined as the action for the event;
Click  Enable to activate the Managing Events rule.
Click the Save button to save the configuration
Click the Undo button to restore what you just configured back to the previous
setting.
Description
Note – Available Actions can differ between products.
User Guide