Table of Contents
Advertisement
An administrator can use the proprietary telnet command "
configuration.
The command format is:
txtConfig (action) [option]
Action
clone
commit
enable
disable
run_immediately NA
run_immediately an existing file
7.1.2
TR-069
TR-069 (Technical Report 069) is a technical specification originally published by the Broadband Forum entitled CPE WAN
Management Protocol (CWMP). It defines an application layer protocol for remote management of end-user devices such as
the NTC-400 Series Router. As a bi-directional SOAP/HTTP-based protocol, it supports communication between customer-
premises equipment (CPE) and Auto Configuration Servers (ACS). The NTC-400 Series Router is such a CPE.
TR-069 is a customised feature for ISPs. We do not recommend that you change the configuration unless instructed by your
ISP. If you have any problem in using this feature for device management, please contact with your ISP or the ACS provider
for help.
274 of 359
© NetComm Wireless 2019
txtConfig
Option
Output file
Duplicate the configuration content from database and
stored as a configuration file.
Example:
The contents in the configuration file are the same as the
plain text commands mentioned above. This action is exactly
the same as performing the "Backup" plain text
configuration.
an existing file
Commit the configuration content to database.
Example:
NA
Enable plain text system config.
Example:
NA
Disable plain text system config.
Example:
Apply the configuration content that has been committed in
database.
Example:
Assign a configuration file to apply.
Example:
Table 189 – Plain system configuration using Telnet Commands
" and related action items to perform the plain system
Description
txtConfig clone /tmp/config
txtConfig commit /tmp/config
txtConfig enable
txtConfig disable
txtConfig run_immediately
txtConfig run_immediately /tmp/config
User Guide
Advertisement
Table of Contents
