Table of Contents
Advertisement
The NTC-400 Series Router allows you to activate and manage USSD services via a SIM card through its web GUI.
1
Select Cellular Toolkit from the Service submenu and click the USSD tab.
2
The USSD screen will open. It contains up to four sections: Configuration, USSD Profile List, USSD Profile
Configuration and USSD Request
8.1.4.1
USSD Configuration
In the Configuration section you specify which 3G/4G module (physical interface) is used for the USSD function and the
system will show which SIM card is currently being used.
Item
Physical Interface
SIM Status
320 of 359
© NetComm Wireless 2019
Figure 369 – USSD interface
Figure 370 – USSD Configuration
Notes
The default setting is:
Choose a cellular interface (3G/4G-1 or 3G/4G-2) to
3G/4G-1
configure the USSD setting for the connected cellular
service.
System generated
The SIM card (identified with SIM_A or SIM_B) that is
associated with the selected cellular service.
Table 230 – USSD Configuration
Description
User Guide
Advertisement
Table of Contents
