Table of Contents
Advertisement
Item
Auto-configuration Disabled by default.
Auto-configuration
Can only be selected when
Type
Auto-configuration is enabled.
Default setting: Stateless
120 of 359
© NetComm Wireless 2019
Notes
Check to enable the Auto configuration feature.
Define the selected IPv6 WAN Connection Type to establish the IPv6
connectivity.
Select Stateless to manage the Local Area Network to be SLAAC + RDNSS
Router Advertisement Lifetime (mandatory field) – Enter the Router
Advertisement Lifetime (in seconds). 200Default setting:
Value Range: 0 - 65535.
Select Stateful to manage the Local Area Network to be Stateful
(DHCPv6).
IPv6 Address Range (Start) (mandatory field) – Enter the start IPv6 Address
for the DHCPv6 range for your local computers.
Default setting: 0100
Value Range: 0001 - FFFF.
IPv6 Address Range (End) (mandatory field) – Enter the end IPv6 Address for
the DHCPv6 range for your local computers.
Default setting: 0200
Value Range: 0001 - FFFF.
IPv6 Address Lifetime (mandatory field) – Enter the DHCPv6 lifetime for your
local computers.
Default setting: 36000
Value Range: 0 - 65535.
Table 85 – Address Auto-configuration
Description
User Guide
Advertisement
Table of Contents
