External Server - NetComm NTC-400 Series User Manual

Item
Group Type
Member to Join
Member List
Group
Save
Undo
4.4

External Server

External Servers allow you to define a range of different types of servers that are external to the NTC-400 Series Router and
which then may be referenced by the NTC-400 Series Router during its operations.
The External Server List section shows all currently defined external servers and some of their settings.
To view the External Server List open the Object Definition submenu, select External Server and then click its External
Server tab:
Item
ID
Server Name
NTC-400 Series
Notes
Mandatory field. Select the member type for the host group from the drop down
list: IP Address-based, MAC Address-based, or Host Name-based
Default selection:
IP Address-based IP Address-based – Only IP address can be added in Member to
Join.
MAC Address – Only MAC address can be added in Member to
Join.
Host Name-based – Only host name can be added in Member to
Join.
Button Add the members to the group in this field.
You can enter the member information that corresponds with
the Member Type above, and press the Join button to add to the
Member List, see next.
List The names of users selected will appear in the row after they are
added using the Join button, see previous.
Click the circled x  to remove members.
Check  Enable to activate this host group rule.
Disabled by
default
Enabled Host Groups can be bound to selected service(s) for
further configuration.
Button Click Save to save the settings
Button Click Undo to cancel the settings
Table 116 – Host Group Configuration
Figure 201 – External Server list
Notes
Integer. The External Server's system generated reference number.
Auto-fill.
System generated. Name entered in External Server Configuration section, see next.
Description
Description
© NetComm Wireless 2019
167 of 359