Create/Edit Packet Filter Rules - NetComm NTC-400 Series User Manual

6.2.2.3

Create/Edit Packet Filter Rules

When  Enable is selected, the buttons on the Packet Filter List section become active.
Click on the Add button to create a new rule in the list. You can add up to twenty (20) URL Blocking rules.
Item
Rule Name Mandatory field.
String format.
Source IP Mandatory field.
Default setting: Any
Source MAC Mandatory field.
Default selection: Any
NTC-400 Series
Figure 285 – URL Blocking Rule List
Figure 286 – URL Blocking Rule Configuration
Notes
Enter a meaningful name of up to 30 characters for the URL blocking rule.
This field is to specify the Source IP address.
Select Any to filter packets coming from any IP addresses.
Select Specific IP Address to filter packets coming from an IP address
entered in this field.
Select IP Range to filter packets coming from a specified range of IP
address entered in this field.
Select IP Address‐based Group from the drop down list to filter packets
coming from the selected group.
Note – Groups must be pre‐defined before this selection
become available in the drop down list.
Refer to Object Definition > Grouping > Host grouping.
Alternatively, click the Add Rule button that displays when
this drop down list is empty to create a new group.
This field specifies the source MAC address or addresses.
Select Any to filter packets coming from any MAC address.
Select Specific MAC Address to filter packets coming from a MAC
address entered in this field.
Description
© NetComm Wireless 2019
249 of 359