Create/Edit External Server - NetComm NTC-400 Series User Manual

Item
Server Type
Server IP/FQDN System generated. Enter these details in the External Server Configuration section, see next.
Server Port
Server Enable
Actions
Add
Delete
4.4.1

Create/Edit External Server

To create a new External Server:
1 From the Object Definition submenu select External Server and click its External Server tab.
2 In the External Server List section click the Add button in the caption bar.
3 The External Server Configuration section will open, see below.
4 Enter the new External Server's details here and click Save.
To edit an existing External Server:
1 From the Object Definition submenu select External Server and then click its External Server tab.
168 of 359
© NetComm Wireless 2019
Notes
Click this group's Edit button in the Actions column to change this name.
System generated. The Server Type selected from the drop down list in the External Server
Configuration section, see next.
Click this group's Edit button in the Actions column to change this name.
Click this group's Edit button in the Actions column to add or edit these
details.
System generated. To change these settings, click this group's Edit button in the Actions
column and make the required changes in the External Server
Configuration section, see next.
Check  Enable to activate the External Server for use in other
Checkbox.
applications throughout the NTC-400 Series Router interface.
Cannot be
When  Enable is unchecked, it is not available for use in other NTC-400
changed from this
list. Series Router settings.
To change this setting, click this group's Edit button in the Actions column
and make the changes in the External Server Configuration section, see
next.
Select checkbox Redundant or obsolete groups can be permanently removed by checking
 Select for those groups and then clicking the Delete button at the
External Server List caption bar.
Edit button Modify an existing External Server by clicking its corresponding Edit button
in the Actions section at the end of each External Server record.
Button Click the Add button to create a new External Server.
Use the Delete button in conjunction with the  Select checkbox in the
Button
Actions section to permanently delete groups that are no longer required.
Table 117 – External Server List
Description
Note – If you want to keep details of the External Server record
(but do not want to permanently delete it) you can deselect the
 Enable button.
User Guide