NetComm NTC-400 Series User Manual page 306

Item
Split Files Optional field.
Default File Size: 200 KB
Packet Optional field.
Interfaces
VAP This means the virtual AP.
Save Button
Undo Button
306 of 359
© NetComm Wireless 2019
Notes
If Split Files option is also enabled, the file name will be
appended with an index code "_<index>".
The file extension is: .pcap
Check  Enable to split the file whenever log file reaches a
specified limit.
If the Split Files option is enabled, you can specify the File
Size and Unit (KB or MB) for the split files.
Value Range for file size: 10 - 99999.
NOTE – File Size cannot be less than 10 KB
Define the interface(s) that Packet Analyzer will work on.
At least, one interface is required, but multiple selections are
also accepted.
The supported interfaces are:
WAN – When the WAN is enabled at Physical Interface, it
can be selected here.
ASY – This means the serial communication interface. It is
used to capture packets appearing in the Field
Communication. Therefore, it can only be selected
when a specific field communication protocol, like
Modbus, is enabled.
When Wi-Fi and VAP are enabled it can be selected here.
Click the Save button to save the configuration.
Click the Undo button to restore to the previous setting.
Table 218 – Enable Packet Analyzer
Description
User Guide