Table of Contents
Advertisement
Item
Back
Button
6.2.5
Application Filter
The Application Filter function can categorize Internet Protocol packets based on their application layer data and allow or
deny access to the router. The tool contains specific application filters for various Internet chat software, P2P download,
Proxy, and A/V streaming applications. In addition, MAC Control activity can be logged, monitored and reported.
6.2.5.1
Application Filter Scenario
When the administrator of the gateway wants to block some P2P or Stream applications, he can use the "Application Filters"
function.
As shown in the diagram, the Gateway is the gateway as a NAT router. Specify IP Range 192.168.123.200~250, and enable
the Application filters function "BT(BitTorrent, BitSpirit, BitComet)", "MMS", "RTSP", "PPStream", "PPSLive" and "Qvcd" by
checking the "Enable" box. The gateway will block those applications to internet.
6.2.5.2
Application Filter Settings
To enable the Application Filter functionality:
1
Select Firewall from the Security submenu on the left and then open the Application Filter tab.
2
Go to the Configuration section of the Application Filter page:
Click Application Filter Enable and set the following parameters:
3
256 of 359
© NetComm Wireless 2019
Notes
When the Back button is clicked the screen will return to the MAC
Control Configuration page.
Table 177 – MAC Control Rule Configuration
Figure 294 – Application Filter Scenario
Figure 295 – Enable Application Filter
Description
User Guide
Advertisement
Table of Contents
