NetComm NTC-400 Series User Manual page 285

Item
SNMP Version v1 is the default setting
Community
Name
User Name
Password
Privacy Mode
Authentication Mandatory field for SNMP
Encryption
Privacy Key
Enable
Save
NTC-400 Series
Notes
Server Port 162 is the default
SNMP trap port.
Mandatory field for SNMP
Version v1 and v2c.
String format: any
text
Mandatory field for SNMP
Version v3.
String format: anytext
Mandatory field for SNMP
Version v3.
String format: anytext
Mandatory field for SNMP
Version v3.
Default setting:
noAuthNoPriv
Version v3
Default setting: None
Mandatory field for SNMP
Version v3
Default setting: None
Mandatory field for SNMP
Version v3
String format: any text
Enabled by default
Button
Description
Value Range: 1 - 65535.
Select the version for the trap.
Selecting v1 or v2c will display a smaller configuration
screen containing five settings.
If v3 is selected six additional configuration settings will
be included in the configuration screen.
Specify the Community Name for a version 1 or version
v2c trap.
Value Range: 1 - 32 characters.
Specify the User Name for this version 3 trap.
Value Range: 1 - 32 characters.
When your Privacy Mode is authNoPriv or authPriv, you
must specify the Password for this version 3 trap.
Value Range: 8 - 64 characters.
Specify the Privacy Mode for this version 3 trap.
Select noAuthNoPriv if you do not use any
authentication types and encryption protocols.
If authNoPriv is selected you must specify the
Authentication and Password.
If authPriv is selected you must specify the
Authentication, Password, Encryption and Privacy Key.
When your Privacy Mode is authNoPriv or authPriv, you
must specify the
Authentication types for this version 3 trap.
Selected the authentication types MD5/ SHA-1 to use.
When your Privacy Mode is authPriv, you must specify
the Encryption protocols for this version 3 trap.
Select either the DES or AES encryption protocol.
When your Privacy Mode is authPriv, you must specify
the Privacy Key (8 - 64 characters) for this version 3
trap.
Click Enable to enable this trap receiver.
The Save button saves the configuration settings, but it
does not apply them to SNMP functions.
When you return to the SNMP main page the "Click on
save button to apply your changes" reminder appears,
285 of 359
© NetComm Wireless 2019