Table of Contents
Advertisement
6.1.1.11 Create/Edit Dynamic VPN Server List
Similar to creating an IPSec VPN Tunnel for site/host to site/host scenario, when Edit button is applied a series of
configuration screen will appear. They are Tunnel Configuration, Local & Remote Configuration, Authentication, IKE Phase,
IKE Proposal Definition, IPSec Phase, and IPSec Proposal Definition. You have to configure the tunnel details for the router
as a Dynamic VPN server.
Note – You can configure one Dynamic VPN server for each WAN interface.
Item
Tunnel
Tunnel Name
Interface
Tunnel Scenario Mandatory field.
Hub and Spoke
Operation
Mode
NTC-400 Series
Figure 246 – Dynamic VPN List
Figure 247 – Dynamic VPN Server
Notes
Disabled by default.
Mandatory field.
String format can be
any text.
Mandatory field.
Default setting:
WAN 1
Default setting:
Dynamic
VPN
Mandatory field.
Default setting:
None
Mandatory field.
Default setting:
Always
on
Description
Check the Enable box to activate the Dynamic
IPSec VPN tunnel.
Enter a meaningful tunnel name.
Value Range: 1 - 19 characters.
Select the WAN interface on which the IPSec tunnel is
to be established.
The IPSec tunnelling scenario is fixed to Dynamic
VPN.
Select None, Hub or Spoke
The available operation mode is: Always On
Failover option is not available for the Dynamic
IPSec scenario.
211 of 359
© NetComm Wireless 2019
Advertisement
Table of Contents
