Create/Edit User List - NetComm NTC-400 Series User Manual

Item
LAN Interface Mandatory field.
Default setting: LAN
Client Mandatory field.
Connection
Idle Time
Button
Save
Button
Refresh
6.3.2.2

Create/Edit User List

There is a User List for listing the information of the available users. Administrator can create, edit, delete, or even search
with a certain key and filter function to quick access to the information you are looking for.
Item
ID
Nickname
User Name
Password
Add
Delete
Filter
Previous
Next
When Add button is applied, User Configuration screen will appear.
NTC-400 Series
Notes
When the MAC Authentication is enabled, the gateway sends out the connecting
client's information to the RADIUS server for authentication.
Select the network interface(s) to apply the MAC Authentication function: LAN or
VLAN(s) (port‐based)
Note – DO NOT choose the interface used by the RADIUS server.
Specify the idle time (in seconds) for a client connection.
If a client did not access network for the specified idle time period, its
authentication will be deemed invalid and the connection terminated.
Click the Save button to save changes.
Click the Refresh button to refresh current page.
Table 185 – Enable MAC Authentication
Notes
Integer Identification reference only.
Any text string Displays the nickname for a user.
entry.
Any text string Displays the MAC address for a user.
entry.
Any text string Displays the password for a user.
entry.
Button Add information of new device authentication
Button Delete information of exists device authentication
Button Search information of exists device authentication
Button Navigation button of authentication list
Button Navigation button of authentication list
Description
Figure 308 – User List
Description
Table 186 – User List
269 of 359
© NetComm Wireless 2019