Create / Edit Virtual Server - NetComm NTC-400 Series User Manual

3.5.2.5

Create / Edit Virtual Server

The router allows you to custom your Virtual Server rules. It supports up to a maximum of 20 rule-based Virtual Server sets.
Click the Add button to display the Virtual Server Rule Configuration screen.
Item Notes
WAN Mandatory field.
Interface Default is ALL.
Server IP Mandatory field.
Protocol Mandatory field.
NTC-400 Series
Figure 149 – Create / Edit Virtual Server
Table 88 – Create / Edit Virtual Server
Defines the selected interface as the interface that packets enter the router.
Select ALL for packets coming into the router from any interface.
Note – The available check boxes (WAN-1 - WAN-4) depend on the number of WAN
interfaces for the product.
This field is to specify the IP address of the interface selected in the WAN Interface setting
above.
When "ICMPv4" is selected, the "Protocol" option of the packet filter rule is ICMPv4.
Select a Time Schedule to apply to this rule, otherwise leave it as Always. (refer to
Scheduling setting under Object Definition)
Check  Enable to enable this rule.
When "TCP" is selected the "Protocol" option of the packet filter rule is TCP.
When Public Port is set to a predefined port from a well-known service, Private Port is the
same as the Public Port number.
When Public Port is set to Single Port, specify a port number. Private Port can be set to a
Single Port number.
When Public Port is set to Port Range, specify a port range. Private Port can be set to
Single Port or Port Range.
Value Range: 1 - 65535 for both Public Port and Private Port.
When "UDP" is selected, the "Protocol" option of the packet filter rule is UDP.
Description
© NetComm Wireless 2019
125 of 359