NetComm NTC-400 Series User Manual page 35

Item
IP
Time
Note – Ensure Packet Filter Log Alert is enabled.
URL Blocking Status
Item
Activated
Blocking Rule
Blocked URL
IP
Time
Note – Ensure URL Blocking Log Alert is enabled.
Web Content Filter Status
Item
Activated Filter
Rule
Detected
Contents
IP
Time
NTC-400 Series
Value setting
Source IP to Destination IP : Destination Protocol (TCP or UDP)
System data. The Source IP (IPv4) of the logged packet.
System data. The Date and Time stamp of the logged packet. Date & time format.
("Month" "Day" "Hours":"Minutes":"Seconds")
Table 22 – Packet Filter Status
Refer to Security > Firewall > Packet Filter tab. Check  Log Alert and save the setting.
Figure 31 – URL Blocking Status
Value setting
System data. This is the URL Blocking Rule name.
System data. This is the logged packet information.
System data. The Source IP (IPv4) of the logged packet.
System data. The Date and Time stamp of the logged packet. Date & time
format. ("Month" "Day" "Hours":"Minutes":"Seconds")
Table 23 – URL Blocking Status
Refer to Security > Firewall > URL Blocking tab. Check  Log Alert and save the setting.
Figure 32 – Web Content Filter Status
Value setting
System data. Logged packet of the rule name. String format.
System data. Logged packet of the filter rule. String format.
System data. Logged packet of the Source IP. IPv4 format.
System data. Logged packet of the Date Time. Date time format ("Month"
"Day" "Hours":"Minutes":"Seconds")
Description
Description
Description
35 of 359
© NetComm Wireless 2019