Create/Edit User Privacy - NetComm NTC-400 Series User Manual

Item
Community
Enable
Save
Undo
Back
7.1.3.5

Create/Edit User Privacy

The SNMP allows you to customise your access control for version 3 users. The router supports up to a maximum of 128 User
Privacy sets.
When Add button is applied, User Privacy Rule Configuration page will display:
The following settings are available to configure User Privacy Rules:
282 of 359
© NetComm Wireless 2019
Notes
Mandatory field.
String format: any text
Default setting: Read Only
Enabled by default
Button
Button
Button
Table 193 – Multiple Community Rule Configuration
Figure 318 – User Privacy List
Figure 319 – User Privacy Rule Configuration
Description
Specify this version 1 or version v2c user's community
that will be allowed Read Only (GET and GETNEXT) or
Read-Write (GET, GETNEXT and SET) access respectively.
The maximum length of the community is 32.
Enables the community as a version 1 or version v2c user.
The Save button saves the configuration settings, but it
does not apply them to SNMP functions.
When you return to the SNMP main page the "Click on
save button to apply your changes" reminder appears,
this reminds the user to click main page Save button at
which point the settings will be applied.
Click the Undo button to cancel the settings.
Click the Back button to return to SNMP configuration
page.
User Guide