NetComm NTC-400 Series User Manual page 318

Item Setting
SIM lock
Remaining times
Save
Change PIN Code
When Change PIN Code button is clicked, the following screen appears.
Item
Current PIN Code
New PIN Code
Verified New
PIN Code
Apply
Cancel
318 of 359
© NetComm Wireless 2019
Figure 366 – Enable / Change PIN Code
Notes
Click  Enable to activate the SIM lock function.
Depends on the
SIM card
To enable the SIM lock function, enter the PIN code and
click Save to apply the setting.
Depends on the Represent the remaining number of attempts to enter the
SIM card SIM PIN.
If you exceed the number of allowed attempts, a PUK code
will be required to unlock the SIM card.
Button Click the Save button to apply the setting.
Button Click the Change PIN code button to change the PIN code
(password).
If the SIM Lock function is not enabled, the Change PIN
code button is disabled. In that case, if you want to change
the PIN code, you have to first enable the SIM Lock
function, fill in the PIN code, and then click the Save button
to enable.
After that, you can click the Change PIN code button to
change the PIN code.
Table 228 – Enable / Change PIN Code
Figure 367 – Change PIN Code
Notes
Required field.
Required field.
Required field.
Button
Button
Table 229 – Change PIN Code
Description
Description
Enter the current (old) PIN code of the SIM card.
Enter the new PIN Code you want to change.
Re-enter the new PIN Code to confirm the new PIN
Code.
Click the Apply button to change the old PIN code to
the new PIN code.
Click the Cancel button to cancel the changes and
keep current PIN code.
User Guide