Table of Contents
Advertisement
3.2.2.9
Port-based VLAN – Inter VLAN Group Routing
Click the VLAN Group Routing button. The VLAN Group Internet Access Definition and Inter VLAN Group Routing are
displayed.
When the Edit button is applied, the following screen is displayed:
Item
VLAN Group Internet
All boxes are
Access Definition
checked by default.
Inter VLAN Group
Disabled by default. Click the expected VLAN IDs box to enable the Inter VLAN access function.
Routing
Save
Button
3.2.2.10 Tag-based VLAN – Create/Edit VLAN Rules
The Tag-based VLAN allows you to customize each LAN port according to VLAN ID. There is a default rule shows the
configuration of all LAN ports and all VAPs.
NTC-400 Series
Figure 93 – VLAN Group Internet Access Definition
Figure 94 – VLAN Group Internet Access Definition
Notes
The default settings mean all VLAN ID members are allowed to access the WAN
interface.
If a VLAN ID box is unchecked, that VLAN ID member can't access the Internet
anymore.
Note – VLAN ID 1 is available always; it is the default VLAN ID of the LAN
rule. The other VLAN IDs are available only when they are enabled.
By default, members in different VLAN IDs can't access each other. The router
supports up to 4 rules for Inter VLAN Group Routing.
For example, if ID_1 and ID_2 are checked, members in VLAN ID_1 can access
members of VLAN ID_2 and vice versa.
Click the Save button to save the configuration
Table 57 – VLAN Group Internet Access Definition
Description
© NetComm Wireless 2019
83 of 359
Advertisement
Table of Contents
