Create/Edit Gre Tunnel - NetComm NTC-400 Series User Manual

Hide thumbs Also See for NTC-400 Series:
Table of Contents

Advertisement

Click GRE Tunnel  Enable and set the Maximum number of Concurrent GRE Tunnels
3
Item
GRE Tunnel
Max. Concurrent
GRE Tunnels
Save
Undo
6.1.5.2

Create/Edit GRE Tunnel

When  Enable is selected, the buttons on the GRE Tunnel List section become active.
Click on the Add button to create a new client in the list. You can create up to the maximum number of concurrent GRE
tunnels that you had set previously in the Configuration section, see above.
Item
Notes
Add
Button
Delete
Button
Client details Fields in
row.
Delete
Button
Enable
Button
240 of 359
© NetComm Wireless 2019
Notes
Check  Enable to activate the GRE functionality.
Checkbox, disabled by
default.
32 is the default setting.
Specify the maximum number of simultaneous GRE
tunnel connections.
32 is the maximum
number.
Button
Click Save to save the setting.
Button
Click Undo to cancel the changes to settings.
Table 166 – Enable GRE Tunnel
Figure 276 – GRE Tunnel List
Click the Add button in the GRE Tunnel List to open the GRE Rule Configuration
screen where you can create new GRE Tunnels, see next section.
Click  Select in the Actions column for one or more GRE Tunnel descriptions
and then click the Delete button to permanently remove them from the list.
The following details are displayed for each client: ID number, Tunnel Name,
Interface, Operation Mode, Tunnel IP, Remote IP, Key, TTL, Keep-alive status,
Remote Subnet address, and Enable/Disabled status
These are all set in the GRE Rule Configuration window. See the next section for
details regarding these settings.
Click  Select for the GRE Tunnel that you want to permanently delete and then
click the Delete button.
Click the Edit button to select Tunnel  Enable in the GRE Rule Configuration
window.
Note that you can uncheck  Enable rather than permanently Delete, this will
allow you to retain the user details while disabling its access to the PPTP client.
Description
Note – The maximum number of
supported tunnels may vary depending on
your model.
Description
User Guide

Advertisement

Table of Contents
loading

Table of Contents