Table of Contents
Advertisement
Item
FW Upgrade
Backup
Configuration
Settings
Auto Restore
Configuration
Self-defined
Logo
Self-defined
CSS
7.2.5.2
MCU Firmware Info
The MCU Firmware Info section displays the current firmware version and allows you to download and install a new
firmware version when it is available.
NTC-400 Series
Notes
Default setting: Via
If new firmware is available, click the FW Upgrade button to
Web UI
upgrade the device firmware Via Web UI or Via Storage.
After clicking on the FW Upgrade button use the Browse tool to
find and select the firmware file, then click the Upgrade button
to start the firmware upgrade process on this device.
Default setting:
Click the Via Web UI button to backup or restore the device
Download
configuration settings.
The action is determined by the following settings in the
dropdown list:
Download – Use this setting to back up the device configuration
to a config.bin file.
Upload – Use this setting to restore a designated configuration
file previously downloaded from the device.
Via Web UI – to retrieve a configuration file via Web GUI, for
example from the manufacturer's website.
Check the Enable button to activate the customized default
Disabled by default.
setting function.
Once the function is activated, click the Save Conf. button to
save the current settings as a configuration file.
Click the Clean Conf. button to erase the stored configuration.
The Conf. Info button displays information about the currently
stored configuration.
Download is the
Insert your company logo into the top left corner of the web
default setting
interface.
The graphic must be in .gif format and be called:"logo.gif"
Select Upload and browse to the file containing the file.
You can also choose Download to export the file.
Add cascading style sheet (.css) code and click Save.
Table 213 – FW Backup & Restore
Description
© NetComm Wireless 2019
299 of 359
Advertisement
Table of Contents
