Table of Contents
Advertisement
3.4.1.11 6in4 WAN Type Configuration
To establish a 6in4 tunnel, find an IPv6 tunnel broker. You can find a list of IPv6 tunnel brokers that support the 6in4 service
on Wikipedia.
Enter the Local IPv4 address of the router into the Client IPv4 Address field on the IPv6 tunnel broker setting page.
Item
Remote IPv4
Address
Local IPv4 Address Value auto-created The IPv4 address of this router.
Local IPv6 Address Mandatory field.
Primary DNS
Secondary DNS
MLD
118 of 359
© NetComm Wireless 2019
Figure 140 – 6in4 WAN Type Configuration
Notes
Mandatory field.
Enter the Server IPv4 Address from your tunnel broker in this
field.
Enter the Client IPv6 Address from the tunnel broker in this
field.
Optional field.
Enter the WAN primary DNS Server.
Optional field.
Enter the WAN secondary DNS Server.
Disabled by default. Enable/Disable the MLD Snooping function
Table 83 – 6in4 WAN Type Configuration
Description
User Guide
Advertisement
Table of Contents
