Create / Edit Mapping Rule List On Dhcp Server - NetComm NTC-400 Series User Manual

Item
Primary DNS IPv4 format
Secondary DNS IPv4 format
Primary WINS IPv4 format
Secondary IPv4 format
WINS
Gateway IPv4 format
Server Disabled by default.
Save Button
Undo Button
Back Button
3.2.3.5

Create / Edit Mapping Rule List on DHCP Server

The router allows you to customize your Mapping Rule List on the DHCP Server. It supports up to a maximum of 64 rule sets.
When the Fix Mapping button is applied, the Mapping Rule List screen appears.
Click the Add button to display the Mapping Rule Configuration screen.
Item
MAC Mandatory field. MAC Address string
Address format.
IP Address Mandatory field. IPv4 format.
Rule Disabled by default.
Save Button
Undo Button
Back Button
NTC-400 Series
Notes
The Primary DNS of this DHCP Server.
The Secondary DNS of this DHCP Server.
The Primary WINS of this DHCP Server.
The Secondary WINS of this DHCP Server.
The Gateway of this DHCP Server.
Check  Enable to activate this DHCP Server.
Click the Save button to save the configuration
Click the Undo button to restore what you just configured back to the previous setting.
When the Back button is clicked the screen will return to the DHCP Server
Configuration page.
Table 59 – DHCP Server Configuration
Figure 101 – Create / Edit Mapping Rule List on DHCP Server
Figure 102 – Mapping Rule Configuration
Notes
The MAC Address of this mapping rule.
The IP Address of this mapping rule.
Check  Enable to activate this rule.
Click the Save button to save the configuration
Click the Undo button to restore what you just configured back to the
previous setting.
When the Back button is clicked the screen will return to the DHCP Server
Configuration page.
Table 60 – Mapping Rule Configuration
Description
Description
© NetComm Wireless 2019
87 of 359