L2Tp As A Client; Enable L2Tp - NetComm NTC-400 Series User Manual

Item
Add Button
User Name Mandatory field.
1 - 32 characters
Password Mandatory field.
1 - 32 characters
Account Checkbox
Delete Button
Edit Button
Save Button
6.1.3.7

L2TP as a Client

When Client is selected in the Configuration section the L2TP Client Configuration screen will appear. Create clients for the
L2TP server here.
6.1.3.8

Enable L2TP

Item
L2TP Checkbox
Client Server Drop-down list
228 of 359
© NetComm Wireless 2019
Figure 262 – User Account Configuration
Notes
Click the Add button in the User Account List to open the User Account
Configuration screen where you can create new user accounts.
Up to ten (10) User Accounts can be created.
Enter a user name for the user account.
Enter a secure password.
Click  Enable to activate the user account.
Click  Select for the User Account that you want to permanently delete
and then click the Delete button.
Click the Edit button to change the User Name or Password of an existing
user account.
Note that you can uncheck  Enable rather than permanently Delete, this
will allow you to retain the user details while disabling its access to the
L2TP server.
Click Save to create the user account.
Table 157 – User Account Configuration
Figure 263 – L2TP Client Configuration
Notes
Click  Enable to activate the L2TG functionality
Select Client from the drop-down list to create an L2TP Client.
Description
Description
User Guide