NetComm NTC-400 Series User Manual page 212

Item
Encapsulation
Protocol
Item
Local Subnet
Local Netmask
Item
Key Mandatory field.
Management
Pre‐shared Key 8
to 32 characters.
Local ID Optional field.
Remote ID Optional field.
212 of 359
© NetComm Wireless 2019
Notes
Mandatory field.
Default setting: ESP
Table 147 – Dynamic VPN Server
Figure 248 – Local & Remote Configuration
Notes
Mandatory field.
Mandatory field.
Table 148 – Local & Remote Configuration
Figure 249 – Authentication
Notes
Select Key Management from the dropdown box for this IPSec tunnel.
IKE+Pre‐shared Key – user needs to set a key (1 - 32 characters).
IKE+X.509 – user needs Certificate to authenticate. IKE+X.509 will be
available only when Certificate has been configured properly.
Refer to Certificate section of this manual and also Object
Definition > Certificate in web‐based utility.
Manually – user needs to enter key ID to authenticate.
Manual key configuration will be explained in the following
Manual Key Management section.
Specify the Local ID for this IPSec tunnel to authenticate:
User Name – The username may include letters and numbers,
but cannot be all numbers.
FQDN – Enter the FQDN.
User@FQDN – Enter the User@FQDN.
Key ID – The Key ID can be letters and/or numbers.
Specify the Remote ID for this IPSec tunnel to authenticate.
Description
Select the Encapsulation Protocol from the
dropdown box for this IPSec tunnel.
Available encapsulations are ESP and AH.
Description
Enter the Local Subnet IP address.
Enter the Local Subnet Mask.
Description
User Guide