Password Management - NetComm NTC-400 Series User Manual

The Telnet with CLI setting allows a user with administrator privileges to access this device through the traditional Telnet
program. Before you can telnet (login) to the device, please configure the related settings and password with care. The
password management part allows you to set the root password for telnet and SSH and access.
Item
Telnet with CLI The LAN Enable box is checked by
Connection
Type
Save
Undo
7.1.4.2

Password management

To reset the password:
Item
root String: any number or character, no
blank characters
The default password for telnet is
' admin
Save Button
Undo Button
288 of 359
© NetComm Wireless 2019
Figure 325 – Telnet with CLI Settings
Notes
default.
Disabled by default.
Telnet  Enable box is disabled by
default.
Default Telnet Service Port: 23
SSH  Enable box is checked by
default.
Default SSH Service Port: 22
Button
Button
Table 198 – Telnet with CLI
Figure 326 – Password Management
Notes
'.
Table 199 – Password Management
Description
Check the  Enable box to activate the Telnet
with CLI function for connecting from WAN/LAN
interfaces.
Check the Telnet  Enable box to activate telnet
service. Check the SSH  Enable box to activate
SSH service. You can set which number of Service
Port you want to provide for the corresponding
service.
Value Range: 1 - 65535.
Click Save to save the settings
Click Undo to cancel the settings
Description
First type the old password and then specify a new
password and confirm it to change the root password.
Note - We highly recommend changing the
default Telnet password with your own
before the device is deployed.
Click Save to save the settings.
Click Undo to cancel the settings.
User Guide