Create/Edit Trap Event Receiver - NetComm NTC-400 Series User Manual

7.1.3.6

Create/Edit Trap Event Receiver

The SNMP allows you to customise your trap event receiver. The router supports up to a maximum of four Trap Event
Receiver sets.
Click the Add button to open the Trap Event Receiver Rule Configuration screen.
Both default SNMP Version of v1 and the user-selected SNMP Version v2c use the following configuration settings:
If you select SNMP Version v3 the following configuration screen containing more settings will be displayed:
Item
Server IP
Server Port
284 of 359
© NetComm Wireless 2019
Figure 320 – Trap Event Receiver List
Figure 321 – Trap Event Receiver Rule Configuration
Figure 322 – Trap Event Receiver Rule Configuration
Notes
Mandatory field.
String format: any IPv4
address.
Mandatory field.
String format: any port
number
Description
Specifies the trap Server IP. The NTC-400 Series Router
sends trap to the server IP.
Specify the trap Server Port.
You can enter in any port number, but you must ensure
the port number is not already in use.
User Guide