NetComm NTC-400 Series User Manual page 24

LAN Interface Network Status
The LAN Interface Network Status screen shows IPv4 and IPv6 information of LAN network.
Item
IPv4 Address
IPv4 Subnet Mask System data.
IPv6 Link-local
Address
IPv6 Global
Address
Action
3G/4G Modem Status
The 3G/4G Modem Status List screen shows status information for 3G/4G WAN network(s).
Item
Physical
Interface
Card
Information
24 of 359
© NetComm Wireless 2019
Figure 13 – LAN Interface Network Status
Value setting
System data. Displays the current IPv4 IP Address of the gateway
This is also the IP Address user use to access Router's Web-
based Utility.
Displays the current mask of the subnet.
System data. Displays the current LAN IPv6 Link-Local address.
This is also the IPv6 IP Address user use to access Router's
Web-based Utility.
System data. Displays the current IPv6 global IP address assigned by your ISP
for your Internet connection.
Button This area provides functional buttons.
Edit IPv4 Button when press, web-based utility will take you to
the Ethernet LAN configuration page. (Basic Network > LAN &
VLAN > Ethernet LAN tab).
Edit IPv6 Button when press, web-based utility will take you to
the IPv6 configuration page. (Basic Network > IPv6 >
Configuration.)
Table 6 – LAN Interface Network Status
Figure 14 – 3G/4G Modem Status
Value setting
System data. Displays the type of WAN physical interface.
Note: Some device model may support two 3G/4G modules. Their
physical interface name will be 3G/4G-1 and 3G/4G-2.
System data. Displays the vendor's 3G/4G modem model name.
Description
Description
User Guide