Item
Dead Peer
Mandatory field.
Detection (DPD)
Disabled by default.
Phase1 Key Life
Mandatory field
Default setting: 3600s
Maximum: 86400s
6.1.1.7
IKE Proposal Definition
Item
ID
Encryption
Authentication
DH Group
NTC-400 Series
Notes
Selected Server – This router will be an X‐Auth server. Click on the X‐
Selected Client –This router will be an X‐Auth client. Enter User name
Select Enable to activate the DPD function.
Specify the Timeout and Delay time in seconds.
Value Range: 0 - 999 seconds for Timeout and Delay.
Specify the Phase1 Key Life Time.
Value Range: 30 - 86400.
Table 141 – IPSec IKE Phase
Figure 241 – IKE Proposal Definition
Notes
Static integer
System generated IKE Proposal Definition reference number.
Drop-down list
Choose from the following encryption methods from the drop
down list:
DES
3DES
AES‐auto
AES‐128
AES‐192
AES‐256
Drop-down list
Choose from the following authentication methods from the
drop down list:
None
MD5
SHA1
SHA2‐256
Drop-down list
Select the DH Group from the drop down list, it can be:
Description
Auth Account button to create remote X‐Auth client account.
and Password to be authenticated by the X‐Auth server router.
Note – X‐Auth Client will not be available if the Dynamic
VPN option was selected in Tunnel Scenario.
Description
207 of 359
© NetComm Wireless 2019