NetComm NTC-400 Series User Manual page 210

Item
Remote Subnet
Remote Netmask
Remote Gateway
Under the Manually Key Management authentication configuration, only one subnet is supported for both Local and Remote
IPSec peer.
Item
Outbound SPI
Inbound SPI
Encryption
Authentication
Save
Undo
Back
210 of 359
© NetComm Wireless 2019
Notes
Mandatory field.
Mandatory field.
Mandatory field.
Table 145 – Manual Key Management
Figure 245 – Manual Proposal
Notes
Hexadecimal format Enter the
Value Range: 0 -
Hexadecimal format Enter the
Value Range: 0 - FFFF.
Mandatory field. Enter the
Hexadecimal format Available encryption methods are
192 or AES‐256.
The key length for DES is
192 is
Mandatory field. Enter the
Available encryptions are
Hexadecimal format
The key length for MD5 is
.
64
Button Click
Button Click
Button Click
Table 146 – Manual Proposal
Description
Enter the Remote Subnet IP address
Enter the Remote Subnet Mask.
Enter the Remote Router's
FQDN name.
Description
for this IPSec tunnel.
Outbound SPI
FFFF.
for this IPSec tunnel.
Inbound SPI
and
Encryption Method
, 3DES is
16
, and AES‐256 is .
48 64
Note – When AH option in Encapsulation is
selected, encryption will not be available.
and
Authentication Method
None, MD5, SHA1 or SHA2‐256
, SHA1 is
32
Note – When AH option in Encapsulation
Protocol is selected, None option in
Authentication will not be available.
to save the settings
Save
to cancel the settings
Undo
to return to the previous page.
Back
IPv4 address or
.
Encryption key
DES, 3DES, AES‐128, AES‐
, AES‐128 is , AES‐
48 32
.
Authentication key
, and SHA2‐2 is
40 56
User Guide