NetComm NTC-400 Series User Manual page 36

Note – Ensure Web Content Filter Log Alert is enabled.
MAC Control Status
Item
Activated
Control Rule
Blocked MAC
Addresses
IP
Time
Note – Ensure MAC Control Log Alert is enabled.
Application Filters Status
Item
Filtered Application
Category
Filtered Application
Name
IP
Time
Note – Ensure Application Filter Log Alert is enabled.
36 of 359
© NetComm Wireless 2019
Table 24 – Web Content Filter Status
Refer to Security > Firewall > Web Content Filter tab. Check  Log Alert and save the setting.
Figure 33 – MAC Control Status
Value setting
System data. This is the MAC Control Rule name.
System data. This is the MAC address of the logged packet.
System data. The Source IP (IPv4) of the logged packet.
System data. The Date and Time stamp of the logged packet. Date & time
format. ("Month" "Day" "Hours":"Minutes":"Seconds")
Table 25 – MAC Control Status
Refer to Security > Firewall > MAC Control tab. Check  Log Alert and save the setting.
Figure 34 – Application Filters Status
Value setting
System data. The name of the Application Category being blocked.
System data. The name of the Application being blocked.
System data. The Source IP (IPv4) of the logged packet.
System data. The Date and Time stamp of the logged packet. Date & time
format. ("Month" "Day" "Hours":"Minutes":"Seconds")
Table 26 – Application Filters Status
Refer to Security > Firewall > Application Filter tab. Check  Log Alert and save the setting.
Description
Description
User Guide