NetComm NTC-400 Series User Manual page 126

Item Notes
Time Optional field.
Schedule
Default setting: (0)
Always
Rule Optional field.
Disabled by default.
Save Button
Undo Button
Back Button
126 of 359
© NetComm Wireless 2019
When Public Port is set to a predefined port from a well-known service, Private Port is the
same as the Public Port number.
When Public Port is set to Single Port, specify a port number. Private Port can be set to a
Single Port number.
When Public Port is set to Port Range, specify a port range. Private Port can be set to
Single Port or Port Range.
Value Range: 1 - 65535 for both Public Port and Private Port.
When "TCP & UDP" is selected, the "Protocol" option of the packet filter rule is TCP and
UDP.
When Public Port is set to a predefined port from a well-known service, Private Port is the
same as the Public Port number.
When Public Port is set to Single Port, specify a port number. Private Port can be set to a
Single Port number.
When Public Port is set to Port Range, specify a port range. Private Port can be set to
Single Port or Port Range.
Value Range: 1 - 65535 for both Public Port and Private Port.
When "GRE" is selected, the "Protocol" option of the packet filter rule is GRE.
When "ESP" is selected, the "Protocol" option of the packet filter rule is ESP.
When "SCTP" is selected, the "Protocol" option of the packet filter rule is SCTP.
When "User-defined" is selected, the "Protocol" option of the packet filter rule is User-
defined. For Protocol Number, enter a port number.
Apply a Time Schedule to this rule; otherwise leave it as (0)Always. (refer to Scheduling
setting under Object Definition)
Check  Enable to activate the rule.
Click the Save button to save the settings.
Click the Undo button to cancel the settings.
When the Back button is clicked the screen will return to previous page.
Description
User Guide