Table of Contents
Advertisement
WAN interface IPv4 Network Status
The WAN interface IPv4 Network Status screen shows status information for IPv4 network.
Item
Value setting
ID
System generated.
Interface
System generated.
WAN Type
System generated.
IP Addr.
System generated.
Subnet
System generated.
Mask
Gateway
System generated.
DNS
System generated.
MAC
System generated.
Address
Conn. Status System generated.
Action
Buttons
22 of 359
© NetComm Wireless 2019
Figure 11 – WAN interface IPv4 Network Status
Displays corresponding WAN interface WAN IDs.
Displays the type of WAN physical interface.
Depending on the model purchased, it can be Ethernet, 3G/4G, etc...
Displays the method which public IP address is obtained from your ISP.
Depending on the model purchased, it can be: Static IP, Dynamic IP, PPPoE, PPTP, L2TP,
3G/4G
Displays the public IP address obtained from your ISP for Internet connection.
Default value is 0.0.0.0 if left unconfigured.
Displays the Subnet Mask for public IP address obtained from your ISP for Internet
connection. Default value is 0.0.0.0 if left unconfigured.
Displays the Gateway IP address obtained from your ISP for Internet connection.
Default value is 0.0.0.0 if left unconfigured.
Displays the IP address of DNS server obtained from your ISP for Internet connection.
Default value is 0.0.0.0 if left unconfigured.
Displays the MAC Address for your ISP to allow you for Internet access.
Note – Not all ISP may require this field.
Displays the connection status of the device to your ISP: Connected or Disconnected
This area provides functional buttons.
Renew button - Allows user to force the device to request an IP address from the DHCP
server.
Note Renew button – Available when DHCP WAN Type is used and WAN connection
is disconnected.
Release button – Allows user to force the device to clear its IP address setting to
disconnect from DHCP server.
Note – Release button is available when DHCP WAN Type is used and WAN
connection is connected.
Connect button – Allows user to manually connect the device to the Internet. Note:
Connect button is available when Connection Control in WAN Type setting is set to
Description
User Guide
Advertisement
Table of Contents
