Table of Contents
Advertisement
3.8.1.4
QoS Configuration Setting
Navigate to the Basic Network > QoS > Configuration tab.
The "Configuration" window allows you to activate the Rule-based QoS function. In addition, you can also enable the
"Flexible Bandwidth Management" (FBM) feature for better utilization of system bandwidth. On the "System Configuration"
window, you can configure the total bandwidth and session of each WAN. The "QoS Rule List" window displays all your
defined QoS rules.
3.8.1.5
Enable QoS Function
Item
QoS Type
Flexible
Bandwidth
Management
Save
Check the "Enable" box to activate the "Rule-based QoS" function. You can also enable the Flexible Bandwidth Management
(FBM) feature when needed. When FBM is enabled, the system adjusts the bandwidth distribution dynamically based on the
current bandwidth usage situation to reach maximum system network performance transparently to all users. The
bandwidth subscription profiles of all current users are considered in the system's automatic adjusting algorithm.
NTC-400 Series
Figure 189 – QoS Configuration
Notes
SoftwareDefault
Select the QoS Type from the dropdown list, and then click
setting: The function
the Enable box to activate the QoS function.
is disabled by default.
Disabled by default.
Click the Enable box to activate the Flexible Bandwidth
Management function.
Button
Click the Save button to save the settings.
Table 105 – QoS Configuration
Description
© NetComm Wireless 2019
151 of 359
Advertisement
Table of Contents
