Dhcp Server - NetComm NTC-400 Series User Manual

Click the Add button to display the Tag-based VLAN Configuration screen.
Item Notes
VLAN ID Mandatory field.
Internet Enabled by default.
Access
Port Disabled by default.
VAP Disabled by default.

DHCP Server

Default setting: DHCP
1
Save Button
3.2.3 DHCP Server
3.2.3.1 DHCP Server
The router supports up to 4 DHCP servers to fulfil the DHCP requests from different VLAN groups (please refer to the VLAN
section for more detail). You can add more DHCP server configurations by clicking on the "Add" button behind "DHCP Server
List", or clicking on the "Edit" button at the end of each DHCP Server on the list to edit its settings. You can select a DHCP
Server and delete it by clicking on the "Select" check-box and then the "Delete" button.
84 of 359
© NetComm Wireless 2019
Figure 95 – Tag-based VLAN List
Figure 96 – Tag-based VLAN Configuration
Define the VLAN ID number.
Range: 6 - 4094
Check  Enable to allow the members in the VLAN group access to the Internet.
Check the LAN port box(es) to join the VLAN group.
Check the VAP box(es) to join the VLAN group.
Select a DHCP Server to these members of this VLAN group.
To create or edit DHCP server for VLAN, refer to Basic Network > LAN & VLAN > DHCP
Server.
Click the Save button to save the configuration.
Note – After clicking the Save button, always click the Apply button to apply the
settings.
Table 58 – Tag-based VLAN Configuration
Description
User Guide