NetComm NTC-400 Series User Manual page 96

Item Notes
Multiple AP Mandatory field.
Names
VAP1 and VAP8
are activated by
default.
Time Schedule Mandatory field.
Network ID String format.
(SSID) Enabled by
default.
STA Isolation Enabled by
default.
Channel Mandatory field.
Default setting:
Auto
Wi-Fi System Mandatory field.
Authentication Mandatory field.
Default setting:
Auto
96 of 359
© NetComm Wireless 2019
By default, the box is checked; it means that stations which are associated to different VAPs
cannot communicate with each other.
Multiple AP Names (VAP) - Multiple SSID feature and the device support up to 8 virtual
SSIDs. Select one VAP to configure its setting.
Enable - Check the enable box to activate the selected VAP.
Max. STA - Limit the maximum number of client stations. Check this box and enter a
limitation. The box is unchecked (unlimited) by default.
Apply a specific Time Schedule to this rule; otherwise leave it as (0) Always.
If the dropdown list is empty, ensure Time Schedule is pre-configured. Refer to the Object
Definition > Scheduling > Configuration tab.
Enter the SSID for the VAP, and decide whether to broadcast the SSID or not.
The SSID is used for identifying the wireless network from another AP, and client stations
will associate with the AP according to the SSID. If the broadcast SSID option is enabled, it
means the SSID will be broadcasted, and the stations can associate with this device by
scanning for available SSIDs.
Check the Enable box to activate this function.
The default setting does not allow stations which are associated to the same VAP to
communicate with each other.
Select a radio channel for the VAP. Each channel corresponds to a different radio band. The
permissible channels depend on the Regulatory Domain.
There are two available options when Auto is selected:
By AP Numbers - The channel will be selected according to AP numbers (lower channels are
better).
By Interference - The channel will be selected according to interference. (lower interference
is better).
Specify the preferred Wi-Fi System. The dropdown list of the Wi-Fi system is based on IEEE
802.11 standard.
2.4G Wi-Fi can use b, g and n only or mixed with each other.
5G Wi-Fi can select a, n and ac only or mixed with each other.
For security, there are several authentication methods supported. Client stations should
provide the key when associate with this device.
When Open is selected, the check box named 802.1x shows up next to the dropdown list.
802.1x (Disabled by default.) - When 802.1x is enabled, the client stations will be
authenticated by a RADIUS server.
RADIUS Server IP (The default IP is 0.0.0.0)
RADIUS Server Port (The default value is 1812)
RADIUS Shared Key
When Shared is selected, the pre-shared WEP key should be set for authenticating.
When Auto is selected, the device will select Open or Shared by requesting the client
automatically.
Description
User Guide