Table of Contents
Advertisement
3.6.2.5
Dynamic Routing Setting
Navigate to the Basic Network > Routing > Dynamic Routing tab.
The dynamic routing setting allows user to customize RIP, OSPF, and BGP protocol through the router based on their office
setting.
On the "Dynamic Routing" page, there are seven configuration windows for the dynamic routing feature. They are the "RIP
Configuration" window, "OSPF Configuration" window, "OSPF Area List", "OSPF Area Configuration", "BGP Configuration",
"BGP Neighbor List" and "BGP Neighbor Configuration" window. RIP, OSPF and BGP protocols can be configured individually.
The "RIP Configuration" window lets you choose which version of RIP protocol to be activated or disable it. The "OSPF
Configuration" window lets you activate the OSPF dynamic routing protocol and specify its backbone subnet, while the "OSPF
Area List" window lists all defined areas in the OSPF network. The "BGP Configuration" window allows you to activate the
BGP dynamic routing protocol and specify its self ID. The "BGP Neighbor List" window lists all defined neighbors in the BGP
network.
3.6.2.6
Enable Dynamic Routing
Check the "Enable" box to activate the "Dynamic Routing" feature.
Item
Dynamic Routing
3.6.2.7
RIP Configuration
The RIP configuration setting allows you to customise the RIP protocol
Item
RIP Enable
NTC-400 Series
Figure 169 – Dynamic Routing Configuration
Notes
Disabled by default.
Table 95 – Dynamic Routing Configuration
Figure 170 – RIP Configuration
Notes
Default setting: Disable
Table 96 – RIP Configuration
Description
Check Enable to activate this function
.
Description
Select Disable, RIP v1 or RIP v2.
139 of 359
© NetComm Wireless 2019
Advertisement
Table of Contents
