Tr-069 Remote Cpe Management Connection Diagram; Establishing A Connection Between An M2M Cdma Router And An Auto Configuration Server - NetComm M2M White Paper

TR-069 Remote CPE Management Connection Diagram

Establishing a connection between an M2M CDMA Router and an
Auto Configuration Server
Before establishing the connection between the M2M CDMA Router and the ACS server, please check the following:
Ensure the relevant version of firmware is loaded in the M2M CDMA Router that supports TR-069
Ensure the M2M CDMA Router is loaded with a test SIM that supports an accessible WAN IP address. In this white
paper, the SIM used in the M2M CDMA Router has a public IP address.
You have the ACS management URL, administrator user name and password for remote management
The M2M CDMA Router TR-069 device product class name and serial number (SN) is registered in the ACS
You have the M2M CDMA Router ACS CPE connection URL, ACS user name and password
You have the M2M CDMA Router CPE TR-069 Connection Request user name and password
You have read the device manual and know how to connect and make device configuration via its web management
interface
www.netcommwireless.com
Figure 1: M2M CDMA Router TR-069 Remote CPE Management
M2M CDMA Router – TR-069 Whitepaper
5